Question 1

What sizes of UHMW PE8000 do you stock in Dubai?

Accepted Answer

We hold UHMW PE8000 in the following forms and size ranges — Plates: 6 - 100 mm thk, Blocks & Profiles: Heavy duty liners and wear plates. Cut-to-size, profiling and kitting are available on request, and anything outside the stock range is sourced direct from the mill.

Question 2

What are the equivalent grades to UHMW PE8000?

Accepted Answer

UHMW PE8000 is commonly cross-referenced with PE-UHMW enhanced, TIVAR HPV. Equivalents are nominal: send us the property that matters for your application and we will confirm the closest grade we can certify.

Question 3

Is UHMW PE8000 supplied with mill certification?

Accepted Answer

Yes. Every delivery of UHMW PE8000 is supplied against ISO 11542 with EN 10204 3.1 mill certification and full heat-number traceability. Third-party inspection can be arranged on request.

Question 4

What is UHMW PE8000 typically used for?

Accepted Answer

UHMW PE8000 is specified for heavy duty silo linings, high wear chute systems, dump body liners for abrasive ore, mainly in Mining, Cement, Bulk Handling. Tell us the duty and we will advise whether UHMW PE8000 or another uhmw-pe grade is the better fit.

Property	Value	Unit
Tensile Strength at Yield	19 - 23	MPa
Elongation at Break	> 300	%
Abrasion (sand slurry, PE1000 = 100)	70	-

Property	Value	Unit
Density	0.94	g/cm3
Max Service Temperature	80	C

UHMW PE8000

Available forms & sizes

Chemical composition (%)

Mechanical properties

Physical properties

Typical applications

Frequently asked

UHMW PE1000

Form	Size range
Plates	6 - 100 mm thk
Blocks & Profiles	Heavy duty liners and wear plates