Construction & Fabrication supply in Bahrain

The most versatile abrasion resistant plate in the range. 450 HBW delivers roughly 2.5 times the service life of mild steel while remaining straightforward to bend, cut and weld in a normal workshop.

Normalised structural plate with guaranteed 27 J impact energy at -20 C. The J2+N condition gives consistent toughness and flatness through thick sections, which is why it is specified for welded structures, crane and bridge work and heavy fabrication in the Gulf.

The workhorse austenitic stainless steel. 304L's lower carbon content prevents carbide precipitation during welding, making it the default choice for welded fabrications that cannot be post-weld annealed.

Weathering structural plate. Copper, chromium and nickel additions let a dense, adherent oxide patina form that seals the surface, so the structure can be left unpainted and the maintenance coating cycle disappears.

The hardest abrasion resistant plate in general production, reserved for extreme sliding wear where part replacement downtime dominates cost.

Quenched and tempered structural steel with 690 MPa minimum yield. Allows dramatic weight reduction in load bearing structures against conventional S355.

The benchmark chromium-molybdenum through-hardening engineering steel. Excellent combination of strength, toughness and machinability in the quenched and tempered condition.

Ultra high strength quenched and tempered plate for the most weight-critical lifting and mobile equipment structures.

Nickel-chromium-molybdenum steel with very high hardenability and toughness in heavy sections, chosen for the most highly stressed machined components.

The highest yield strength structural plate in commercial supply, used where every kilogram of structural weight carries a payload penalty.