# Axicor DWC LLC

> Dubai (DWC free zone) based stockist and supplier of specialty steel and high-performance alloys, trading since 2014 and serving customers in over 50 countries. We supply certified material in plate, sheet, pipe, bar, flange and fitting form, cut and profiled to requirement.

Contact: sales@axicor.ae | +971 4 357 9568 | Unit 121, Building A5, Dubai World Central, Dubai, UAE
Website: https://www.axicor.ae
Arabic version of any page: prefix the path with /ar (for example https://www.axicor.ae/ar/materials)

## Product forms supplied

- Plates: Hot rolled and quenched plate, cut to size, profile cut or supplied full size.
- Sheets & Coils: Cold and hot rolled sheet and coil in 2B, BA, No.1 and mill finishes.
- Seamless Pipes & Tubes: Seamless pipe and tube for pressure, process and structural service.
- Welded Pipes: EFW, ERW and LSAW welded pipe for large diameter and low pressure service.
- Round Bars: Forged, rolled and peeled bar for machining, shafts and fasteners.
- Flanges: WN, SO, blind, lap joint and spectacle flanges to ASME B16.5 and B16.47.
- Fittings: Butt weld and forged fittings: elbows, tees, reducers, caps and couplings.
- Blocks & Profiles: Cut blocks, machined profiles, liners and fabricated wear parts.

## Material families and grades

### Stainless Steel
Austenitic grades for corrosion resistance across process industries
Page: https://www.axicor.ae/materials/stainless-steel

- **321 / 347** (UNS S32100 / S34700, EN 1.4541 / 1.4550): Titanium and niobium stabilised austenitic grades. The stabilising addition ties up carbon so the steel resists intergranular corrosion after prolonged exposure in the 425-815 C sensitisation range.
  - Equivalents: 1.4541, 1.4550, SUS321, SUS347
  - Forms: plates, seamless-pipes, round-bars, flanges, fittings
  - Datasheet page: https://www.axicor.ae/materials/stainless-steel/ss-321-347
- **316 / 316L** (UNS S31600 / S31603, EN 1.4401 / 1.4404, JIS SUS316 / SUS316L): Molybdenum-bearing austenitic stainless steel. The 2-3% Mo addition transforms pitting resistance in chloride-bearing media, making 316L the baseline grade for marine and chemical service in the Gulf.
  - Equivalents: 1.4401, 1.4404, SUS316L, X2CrNiMo17-12-2
  - Forms: plates, sheets-coils, seamless-pipes, round-bars, flanges, fittings
  - Datasheet page: https://www.axicor.ae/materials/stainless-steel/ss-316-316l
- **304 / 304L** (UNS S30400 / S30403, EN 1.4301 / 1.4307, JIS SUS304 / SUS304L): The workhorse austenitic stainless steel. 304L's lower carbon content prevents carbide precipitation during welding, making it the default choice for welded fabrications that cannot be post-weld annealed.
  - Equivalents: 1.4301, 1.4307, SUS304L, X2CrNi18-9
  - Forms: plates, sheets-coils, seamless-pipes, round-bars, flanges, fittings
  - Datasheet page: https://www.axicor.ae/materials/stainless-steel/ss-304-304l
- **316Ti Stainless Steel** (UNS S31635, EN 1.4571 / X6CrNiMoTi17-12-2, JIS SUS316Ti): Titanium-stabilised 316. The titanium ties up carbon so the steel keeps its intergranular corrosion resistance after long exposure in the 425 - 815 C sensitisation range, and it holds higher creep strength than 316L in h
  - Equivalents: 1.4571, X6CrNiMoTi17-12-2, SUS316Ti, 316Ti
  - Forms: plates, seamless-pipes, seamless-pipes, round-bars, flanges, fittings
  - Datasheet page: https://www.axicor.ae/materials/stainless-steel/ss-316ti
- **317L Stainless Steel** (UNS S31703, EN 1.4438 / X2CrNiMo18-15-4, JIS SUS317L): A molybdenum-up step on 316L. Raising Mo to 3 - 4% lifts PREN to around 30, which buys real margin against pitting and crevice attack in pulp, scrubber and chloride service where 316L is borderline but duplex is more tha
  - Equivalents: 1.4438, X2CrNiMo18-15-4, SUS317L, 317L
  - Forms: plates, seamless-pipes, seamless-pipes, round-bars, flanges, fittings
  - Datasheet page: https://www.axicor.ae/materials/stainless-steel/ss-317l
- **310S Stainless Steel** (UNS S31008, EN 1.4845 / X8CrNi25-21, JIS SUS310S): The high-temperature austenitic. 25Cr-20Ni gives scaling resistance to around 1035 C in continuous service, so 310S is the grade for furnace internals, radiant tubes and anything that lives in flue gas rather than in wat
  - Equivalents: 1.4845, X8CrNi25-21, SUS310S, 310S
  - Forms: plates, seamless-pipes, seamless-pipes, round-bars, flanges, fittings
  - Datasheet page: https://www.axicor.ae/materials/stainless-steel/ss-310s
- **904L** (UNS N08904, EN 1.4539): High alloy austenitic grade with 4-5% molybdenum and copper, bridging the gap between 316L and nickel alloys for sulphuric and phosphoric acid service.
  - Equivalents: 1.4539, N08904, Uranus B6
  - Forms: plates, seamless-pipes, round-bars, flanges, fittings
  - Datasheet page: https://www.axicor.ae/materials/stainless-steel/ss-904l

### Duplex & Super Duplex
Twice the strength of austenitic steel with superior chloride resistance
Page: https://www.axicor.ae/materials/duplex-super-duplex

- **Duplex 2205** (UNS S31803 / S32205, EN 1.4462, JIS SUS329J3L): The most widely used duplex grade. Roughly double the yield strength of 316L, allowing thinner and lighter sections while delivering far better chloride stress corrosion cracking resistance.
  - Equivalents: 1.4462, S32205, SAF 2205
  - Forms: plates, seamless-pipes, welded-pipes, round-bars, flanges, fittings
  - Datasheet page: https://www.axicor.ae/materials/duplex-super-duplex/duplex-2205
- **Super Duplex 2507** (UNS S32750 / S32760, EN 1.4410 / 1.4501): Super duplex with PREN above 40 for the most aggressive seawater and sour service. S32760 (Zeron 100) adds tungsten and copper for enhanced acid resistance.
  - Equivalents: 1.4410, 1.4501, SAF 2507, Zeron 100
  - Forms: plates, seamless-pipes, round-bars, flanges, fittings
  - Datasheet page: https://www.axicor.ae/materials/duplex-super-duplex/super-duplex-2507

### Wear Resistant Steel
Through-hardened abrasion resistant plate from 400 to 600 HBW
Page: https://www.axicor.ae/materials/wear-resistant-steel

- **Hardox 450** (Nominal Hardness 450 HBW): The most versatile abrasion resistant plate in the range. 450 HBW delivers roughly 2.5 times the service life of mild steel while remaining straightforward to bend, cut and weld in a normal workshop.
  - Equivalents: Dillidur 400V, Quard 450, XAR 450, Abrex 450
  - Forms: plates, blocks-profiles
  - Datasheet page: https://www.axicor.ae/materials/wear-resistant-steel/hardox-450
- **Hardox 500** (Nominal Hardness 500 HBW): Higher hardness plate for severe sliding abrasion where 450 HBW wears out too quickly, while retaining good workshop formability.
  - Equivalents: Dillidur 500V, Quard 500, XAR 500
  - Forms: plates, blocks-profiles
  - Datasheet page: https://www.axicor.ae/materials/wear-resistant-steel/hardox-500
- **Hardox 600** (Nominal Hardness 600 HBW): The hardest abrasion resistant plate in general production, reserved for extreme sliding wear where part replacement downtime dominates cost.
  - Equivalents: XAR 600, Abrex 600
  - Forms: plates, blocks-profiles
  - Datasheet page: https://www.axicor.ae/materials/wear-resistant-steel/hardox-600

### Nickel Alloys
Inconel, Monel, Incoloy and Hastelloy for extreme service
Page: https://www.axicor.ae/materials/nickel-alloys

- **Alloy 800 (Incoloy 800)** (UNS N08800, EN 1.4876 / X10NiCrAlTi32-21, Trade name Incoloy 800): Iron-nickel-chromium alloy for high temperature strength with oxidation and carburisation resistance. The 32Ni-21Cr balance resists chloride stress corrosion cracking that austenitic stainless suffers, which is why it is
  - Equivalents: N08800, 1.4876, Incoloy 800, Alloy 800
  - Forms: seamless-pipes, seamless-pipes, plates, round-bars, fittings
  - Datasheet page: https://www.axicor.ae/materials/nickel-alloys/alloy-800
- **Alloy 800HT (Incoloy 800HT)** (UNS N08811, EN 1.4959 / X8NiCrAlTi32-21, Trade name Incoloy 800HT): The creep-optimised version of Alloy 800. Controlled carbon plus a combined aluminium and titanium window of 0.85 - 1.20% gives far better creep rupture strength above 600 C, so 800HT is the grade for the hottest reforme
  - Equivalents: N08811, 1.4959, Incoloy 800HT, Alloy 800H / 800HT
  - Forms: seamless-pipes, seamless-pipes, plates, round-bars, fittings
  - Datasheet page: https://www.axicor.ae/materials/nickel-alloys/alloy-800ht
- **Alloy 825 (Incoloy 825)** (UNS N08825, EN 2.4858 / NiCr21Mo, Trade name Incoloy 825): Nickel-iron-chromium with molybdenum, copper and titanium. The combination handles both reducing and oxidising acids and resists chloride stress corrosion cracking and sour well fluids, making 825 the standard CRA for so
  - Equivalents: N08825, 2.4858, Incoloy 825, NiCr21Mo
  - Forms: seamless-pipes, seamless-pipes, plates, round-bars, fittings
  - Datasheet page: https://www.axicor.ae/materials/nickel-alloys/alloy-825
- **Alloy 740H** (UNS N07740, Trade name Inconel 740H, ASME Code Case 2702): Precipitation-hardened nickel alloy developed for advanced ultra-supercritical boilers. Gamma-prime strengthening plus about 25% chromium holds creep rupture strength and coal-ash corrosion resistance at 750 C and above,
  - Equivalents: N07740, Inconel 740H, Alloy 740H
  - Forms: seamless-pipes, seamless-pipes, plates, round-bars
  - Datasheet page: https://www.axicor.ae/materials/nickel-alloys/alloy-740
- **Hastelloy C276** (UNS N10276, EN 2.4819): Nickel-molybdenum-chromium alloy with tungsten, regarded as the most universally corrosion resistant alloy available for both oxidising and reducing media.
  - Equivalents: 2.4819, N10276, Alloy C276
  - Forms: plates, seamless-pipes, round-bars, flanges, fittings
  - Datasheet page: https://www.axicor.ae/materials/nickel-alloys/hastelloy-c276
- **Monel 400** (UNS N04400, EN 2.4360): Nickel-copper alloy with outstanding resistance to flowing seawater, hydrofluoric acid and alkalis, and total immunity to chloride stress corrosion cracking.
  - Equivalents: 2.4360, N04400, Alloy 400, NiCu30Fe
  - Forms: plates, seamless-pipes, round-bars, flanges, fittings
  - Datasheet page: https://www.axicor.ae/materials/nickel-alloys/monel-400
- **Inconel 600** (UNS N06600, EN 2.4816): Solid solution nickel-chromium-iron alloy with high resistance to oxidation, carburisation and chloride ion stress corrosion cracking at elevated temperature.
  - Equivalents: 2.4816, N06600, Alloy 600, NiCr15Fe
  - Forms: plates, seamless-pipes, round-bars, flanges, fittings
  - Datasheet page: https://www.axicor.ae/materials/nickel-alloys/inconel-600
- **Inconel 625** (UNS N06625, EN 2.4856): Nickel-chromium-molybdenum alloy strengthened by niobium. Exceptional strength and corrosion resistance from cryogenic temperatures to 980 C without heat treatment.
  - Equivalents: 2.4856, N06625, Alloy 625, NiCr22Mo9Nb
  - Forms: plates, seamless-pipes, round-bars, flanges, fittings
  - Datasheet page: https://www.axicor.ae/materials/nickel-alloys/inconel-625
- **Alloy 617** (UNS N06617, EN 2.4663 / NiCr23Co12Mo, Trade name Inconel 617): Nickel-chromium-cobalt-molybdenum alloy for the extreme end of high temperature service. Solid solution strengthening keeps useful creep strength to 1100 C while the chromium and aluminium give oxidation resistance, so 6
  - Equivalents: N06617, 2.4663, Inconel 617, NiCr23Co12Mo
  - Forms: seamless-pipes, seamless-pipes, plates, round-bars, fittings
  - Datasheet page: https://www.axicor.ae/materials/nickel-alloys/alloy-617

### High Strength Steel
Quenched and tempered structural steel, S690QL to S1100QL
Page: https://www.axicor.ae/materials/high-strength-steel

- **S1100QL** (EN S1100QL): The highest yield strength structural plate in commercial supply, used where every kilogram of structural weight carries a payload penalty.
  - Equivalents: Strenx 1100, Weldox 1100
  - Forms: plates
  - Datasheet page: https://www.axicor.ae/materials/high-strength-steel/s1100ql
- **S960QL** (EN S960QL / 1.8933): Ultra high strength quenched and tempered plate for the most weight-critical lifting and mobile equipment structures.
  - Equivalents: 1.8933, Strenx 960, Weldox 960
  - Forms: plates
  - Datasheet page: https://www.axicor.ae/materials/high-strength-steel/s960ql
- **S690QL** (EN S690QL / 1.8928): Quenched and tempered structural steel with 690 MPa minimum yield. Allows dramatic weight reduction in load bearing structures against conventional S355.
  - Equivalents: 1.8928, Weldox 700, Strenx 700, A514
  - Forms: plates
  - Datasheet page: https://www.axicor.ae/materials/high-strength-steel/s690ql

### Alloy Steel
Through-hardening and case-hardening engineering steels
Page: https://www.axicor.ae/materials/alloy-steel

- **A335 P12 Seamless Pipe** (ASTM / ASME A335 / SA335 Grade P12, EN 13CrMo4-5 / 1.7335, Fittings / flanges A234 WP12 / A182 F12): 1Cr-0.5Mo seamless pipe. The economical Cr-Mo pipe grade for boiler feed, steam and hot process service up to around 540 C, and the usual partner to SA387 Grade 12 plate.
  - Equivalents: 13CrMo4-5, 1.7335, WP12, F12
  - Forms: seamless-pipes, fittings, flanges
  - Datasheet page: https://www.axicor.ae/materials/alloy-steel/a335-p12
- **SA387 Grade 11 Class 2** (ASTM / ASME A387 / SA387 Grade 11 Class 2, EN 13CrMoSi5-5 / 1.7336): 1.25Cr-0.5Mo-Si pressure vessel plate. The silicon addition improves oxidation resistance, making Grade 11 the common choice for hot wall vessels and hydrogen service up to around 550 C where full 2.25Cr strength is not 
  - Equivalents: 13CrMoSi5-5, 1.7336, A387 Gr 11 Cl 2
  - Forms: plates, flanges, fittings
  - Datasheet page: https://www.axicor.ae/materials/alloy-steel/sa387-grade-11
- **SA387 Grade 12 Class 2** (ASTM / ASME A387 / SA387 Grade 12 Class 2, EN 13CrMo4-5 / 1.7335): 1Cr-0.5Mo pressure vessel plate. The economical Cr-Mo grade for moderate temperature pressure parts, widely used for separator and drum shells where creep and hydrogen resistance are needed but the duty is below the 2.25
  - Equivalents: 13CrMo4-5, 1.7335, A387 Gr 12 Cl 2
  - Forms: plates, flanges, fittings
  - Datasheet page: https://www.axicor.ae/materials/alloy-steel/sa387-grade-12
- **SA387 Grade 22 Class 2** (ASTM / ASME A387 / SA387 Grade 22 Class 2, EN 10CrMo9-10 / 1.7380): 2.25Cr-1Mo pressure vessel plate — the refinery standard for hydroprocessing. The higher chromium and molybdenum push the Nelson curve limit well above Grade 11, which is why reactors, separators and hot wall equipment i
  - Equivalents: 10CrMo9-10, 1.7380, A387 Gr 22 Cl 2
  - Forms: plates, flanges, fittings
  - Datasheet page: https://www.axicor.ae/materials/alloy-steel/sa387-grade-22
- **AISI 4340 / 34CrNiMo6** (AISI 4340, EN 34CrNiMo6 / 1.6582): Nickel-chromium-molybdenum steel with very high hardenability and toughness in heavy sections, chosen for the most highly stressed machined components.
  - Equivalents: 1.6582, 34CrNiMo6, SNCM439, 817M40
  - Forms: round-bars, blocks-profiles
  - Datasheet page: https://www.axicor.ae/materials/alloy-steel/aisi-4340
- **AISI 4140 / 42CrMo4** (AISI 4140, EN 42CrMo4 / 1.7225, JIS SCM440): The benchmark chromium-molybdenum through-hardening engineering steel. Excellent combination of strength, toughness and machinability in the quenched and tempered condition.
  - Equivalents: 1.7225, 42CrMo4, SCM440, 709M40
  - Forms: round-bars, plates, blocks-profiles
  - Datasheet page: https://www.axicor.ae/materials/alloy-steel/aisi-4140
- **SA387 Grade 5 Class 2** (ASTM / ASME A387 / SA387 Grade 5 Class 2, EN X12CrMo5 / 1.7362): 5Cr-0.5Mo plate. The chromium level lifts resistance to sulphidic corrosion and high temperature oxidation, so Grade 5 is specified for crude and vacuum unit hot sections where naphthenic and sulphur attack dominate.
  - Equivalents: X12CrMo5, 1.7362, A387 Gr 5 Cl 2
  - Forms: plates, flanges, fittings
  - Datasheet page: https://www.axicor.ae/materials/alloy-steel/sa387-grade-5
- **SA387 Grade 9 Class 2** (ASTM / ASME A387 / SA387 Grade 9 Class 2, EN X11CrMo9-1 / 1.7386): 9Cr-1Mo plate for high temperature service. Used where sulphidic corrosion resistance and creep strength have to be carried above the 5Cr range, typically in refinery heaters and transfer line equipment.
  - Equivalents: X11CrMo9-1, 1.7386, A387 Gr 9 Cl 2
  - Forms: plates, flanges, fittings
  - Datasheet page: https://www.axicor.ae/materials/alloy-steel/sa387-grade-9
- **SA387 Grade 91 Class 2** (ASTM / ASME A387 / SA387 Grade 91 Class 2, EN X10CrMoVNb9-1 / 1.4903): Modified 9Cr-1Mo-V (Grade 91) plate. Vanadium and niobium micro-alloying gives roughly twice the creep rupture strength of Grade 22 at 550 - 600 C, enabling thinner, lighter pressure parts in supercritical steam and high
  - Equivalents: X10CrMoVNb9-1, 1.4903, P91, A387 Gr 91
  - Forms: plates, flanges, fittings
  - Datasheet page: https://www.axicor.ae/materials/alloy-steel/sa387-grade-91
- **A335 P11 Seamless Pipe** (ASTM / ASME A335 / SA335 Grade P11, EN 13CrMoSi5-5 / 1.7336, Fittings / flanges A234 WP11 / A182 F11): 1.25Cr-0.5Mo seamless pipe. The matching pipe grade to SA387 Grade 11, used for moderate temperature steam and process lines where plain carbon steel loses strength and oxidation resistance.
  - Equivalents: 13CrMoSi5-5, 1.7336, WP11, F11
  - Forms: seamless-pipes, fittings, flanges
  - Datasheet page: https://www.axicor.ae/materials/alloy-steel/a335-p11
- **A335 P22 Seamless Pipe** (ASTM / ASME A335 / SA335 Grade P22, EN 10CrMo9-10 / 1.7380, Fittings / flanges A234 WP22 / A182 F22): 2.25Cr-1Mo seamless pipe — the main steam and hot reheat standard. P22 carries creep strength and hydrogen resistance across refinery hot wall piping, superheater headers and heater coils, and is the pipe most often pair
  - Equivalents: 10CrMo9-10, 1.7380, WP22, F22
  - Forms: seamless-pipes, fittings, flanges
  - Datasheet page: https://www.axicor.ae/materials/alloy-steel/a335-p22
- **A335 P5 Seamless Pipe** (ASTM / ASME A335 / SA335 Grade P5, EN X12CrMo5 / 1.7362, Fittings / flanges A234 WP5 / A182 F5): 5Cr-0.5Mo seamless pipe for sulphidic and naphthenic service. Specified on crude and vacuum transfer lines and heater passes where sulphur attack, not pressure, sets the material.
  - Equivalents: X12CrMo5, 1.7362, WP5, F5
  - Forms: seamless-pipes, fittings, flanges
  - Datasheet page: https://www.axicor.ae/materials/alloy-steel/a335-p5
- **A335 P9 Seamless Pipe** (ASTM / ASME A335 / SA335 Grade P9, EN X11CrMo9-1 / 1.7386, Fittings / flanges A234 WP9 / A182 F9): 9Cr-1Mo seamless pipe. Higher chromium for oxidation and sulphidic corrosion resistance in refinery heater coils and high temperature transfer lines.
  - Equivalents: X11CrMo9-1, 1.7386, WP9, F9
  - Forms: seamless-pipes, fittings, flanges
  - Datasheet page: https://www.axicor.ae/materials/alloy-steel/a335-p9
- **A335 P91 Seamless Pipe** (ASTM / ASME A335 / SA335 Grade P91, EN X10CrMoVNb9-1 / 1.4903, Fittings / flanges A234 WP91 / A182 F91): Modified 9Cr-1Mo-V (P91) seamless pipe for supercritical steam. The creep strength allows a much thinner wall than P22 at 580 - 600 C, cutting weight and thermal fatigue on main steam and hot reheat lines. Hardness after
  - Equivalents: X10CrMoVNb9-1, 1.4903, WP91, F91
  - Forms: seamless-pipes, fittings, flanges
  - Datasheet page: https://www.axicor.ae/materials/alloy-steel/a335-p91

### Titanium
Highest strength-to-weight ratio with total seawater resistance
Page: https://www.axicor.ae/materials/titanium

- **Titanium Grade 2** (UNS R50400, EN 3.7035, ASTM Grade 2): Commercially pure titanium, the industry workhorse. Fully resistant to seawater and oxidising chlorides with excellent formability and weldability.
  - Equivalents: 3.7035, R50400, Ti Gr2
  - Forms: plates, seamless-pipes, round-bars, flanges, fittings, sheets-coils
  - Datasheet page: https://www.axicor.ae/materials/titanium/titanium-grade-2
- **Titanium Grade 5 (Ti-6Al-4V)** (UNS R56400, EN 3.7165, ASTM Grade 5): The most widely used titanium alloy, accounting for the majority of all titanium consumption. Roughly three times the strength of commercially pure titanium at the same density.
  - Equivalents: 3.7165, R56400, Ti-6Al-4V, TA6V
  - Forms: plates, round-bars, blocks-profiles
  - Datasheet page: https://www.axicor.ae/materials/titanium/titanium-grade-5

### Armor & Ballistic Steel
Protection plate qualified to STANAG and NIJ threat levels
Page: https://www.axicor.ae/materials/armor-ballistic-steel

- **Armox 500T** (Nominal Hardness 480 - 540 HBW): The most widely used protection plate worldwide. Balances ballistic performance with the weldability and formability a fabricator needs to build complete armoured structures.
  - Equivalents: Mars 240, Ramor 500, Protection 500
  - Forms: plates, blocks-profiles
  - Datasheet page: https://www.axicor.ae/materials/armor-ballistic-steel/armox-500t
- **Armox 600T** (Nominal Hardness 570 - 640 HBW): High hardness protection plate delivering the same protection level at reduced weight, or a higher threat level at the same weight, compared with 500 HBW armour.
  - Equivalents: Mars 300, Ramor 550
  - Forms: plates, blocks-profiles
  - Datasheet page: https://www.axicor.ae/materials/armor-ballistic-steel/armox-600t

### UHMW-PE
Self-lubricating polymer liners that outlast steel in sliding wear
Page: https://www.axicor.ae/materials/uhmw-pe

- **UHMW PE1000** (Material PE-UHMW, PE1000): Standard ultra high molecular weight polyethylene liner sheet. The lowest coefficient of friction of any engineering polymer combined with outstanding impact absorption.
  - Equivalents: PE-UHMW, TIVAR 1000, Polystone M
  - Forms: plates, blocks-profiles
  - Datasheet page: https://www.axicor.ae/materials/uhmw-pe/uhmw-pe1000
- **UHMW PE8000** (Material PE-UHMW enhanced, PE8000): Enhanced UHMW-PE with a higher molecular weight delivering around 30% better abrasion performance than standard PE1000 for the most demanding liner duties.
  - Equivalents: PE-UHMW enhanced, TIVAR HPV
  - Forms: plates, blocks-profiles
  - Datasheet page: https://www.axicor.ae/materials/uhmw-pe/uhmw-pe8000

### OCTG & Line Pipe
API 5L line pipe and oil country tubulars for transmission duty
Page: https://www.axicor.ae/materials/octg-line-pipe

- **API 5L X52 / L360** (API 5L X52, ISO 3183 L360): The baseline transmission grade. X52 balances weldability against pressure rating, which is why it remains the default for gathering lines, utility piping and plant interconnects where wall thickness rather than yield st
  - Equivalents: L360, L360, ASTM A106 Gr B (lower grade substitute)
  - Forms: seamless-pipes, welded-pipes, flanges, fittings
  - Datasheet page: https://www.axicor.ae/materials/octg-line-pipe/api-5l-x52
- **API 5L X70 / L485** (API 5L X70, ISO 3183 L485): High strength thermomechanically rolled line pipe for long distance, large diameter transmission. X70 is specified where the pipeline economics are driven by wall thickness and steel tonnage over hundreds of kilometres.
  - Equivalents: L485, L485, ASTM A106 Gr B (lower grade substitute)
  - Forms: seamless-pipes, welded-pipes, flanges, fittings
  - Datasheet page: https://www.axicor.ae/materials/octg-line-pipe/api-5l-x70
- **API 5L X65 / L450** (API 5L X65, ISO 3183 L450): The workhorse offshore and high-pressure grade. The higher yield allows a thinner wall at the same design pressure, cutting pipe weight on risers and long tie-backs, and X65 is the grade most often specified with sour se
  - Equivalents: L450, L450, ASTM A106 Gr B (lower grade substitute)
  - Forms: seamless-pipes, welded-pipes, flanges, fittings
  - Datasheet page: https://www.axicor.ae/materials/octg-line-pipe/api-5l-x65

### Carbon Steel Plates
Structural, weathering and pressure vessel plate in normalised condition
Page: https://www.axicor.ae/materials/carbon-steel-plates

- **S355J2+N Steel Plates** (EN S355J2+N / 1.0570, ASTM A572 Gr 50 (nearest), JIS SM490YB): Normalised structural plate with guaranteed 27 J impact energy at -20 C. The J2+N condition gives consistent toughness and flatness through thick sections, which is why it is specified for welded structures, crane and br
  - Equivalents: 1.0570, S355J2+N, A572 Gr 50, SM490YB
  - Forms: plates, sheets-coils
  - Datasheet page: https://www.axicor.ae/materials/carbon-steel-plates/s355j2n
- **S355J2W+N / Corten Steel Plates** (EN S355J2W+N / 1.8965, ASTM A588 Grade A / A709 Gr 50W, Trade name Corten B): Weathering structural plate. Copper, chromium and nickel additions let a dense, adherent oxide patina form that seals the surface, so the structure can be left unpainted and the maintenance coating cycle disappears.
  - Equivalents: 1.8965, Corten B, A588 Gr A, A709 Gr 50W
  - Forms: plates, sheets-coils
  - Datasheet page: https://www.axicor.ae/materials/carbon-steel-plates/s355j2w-corten
- **SA516 Grade 60 Plates** (ASTM / ASME A516 / SA516 Grade 60, EN P265GH / 1.0425 (nearest), Metric SA516M Grade 415): Carbon pressure vessel plate for moderate and lower temperature service. The lower carbon of Grade 60 gives better formability and weldability than Grade 70, which suits cold-formed heads, thin shells and plant where not
  - Equivalents: SA516 Gr 60, P265GH, 1.0425, SA516M Gr 415
  - Forms: plates
  - Datasheet page: https://www.axicor.ae/materials/carbon-steel-plates/sa516-grade-60
- **SA516 Grade 70 Plates** (ASTM / ASME A516 / SA516 Grade 70, EN P355GH / 1.0473 (nearest), Metric SA516M Grade 485): The default carbon pressure vessel plate. Grade 70 carries the highest tensile of the SA516 family, and for sour service it is supplied with controlled sulphur, calcium treatment and HIC / SSC testing so wet H2S equipmen
  - Equivalents: SA516 Gr 70, P355GH, 1.0473, SA516M Gr 485
  - Forms: plates
  - Datasheet page: https://www.axicor.ae/materials/carbon-steel-plates/sa516-grade-70

### Cupro Nickel
Copper-nickel alloys that resist seawater and refuse to foul
Page: https://www.axicor.ae/materials/cupro-nickel

- **Cupro Nickel 66/30/2/2 (C71640)** (UNS C71640, EN CuNi30Fe2Mn2, Common name 66/30/2/2): The desalination variant of 70/30. Raising iron and manganese to about 2% each stabilises the protective film under high velocity, sand-laden and partly deaerated brine, which is exactly the duty inside MSF evaporator he
  - Equivalents: C71640, CuNi30Fe2Mn2, 66/30/2/2
  - Forms: seamless-pipes, plates, fittings, flanges
  - Datasheet page: https://www.axicor.ae/materials/cupro-nickel/cuni-66-30-2-2
- **Cupro Nickel 90/10 Seamless Pipes** (UNS C70600, EN CW352H / CuNi10Fe1Mn, DIN 2.0872, Navy MIL-T-16420K): The default seawater alloy. 90% copper with 10% nickel and a controlled iron addition builds a protective cuprous oxide film in seawater, and the inherent copper toxicity stops macrofouling — barnacles and mussels do not
  - Equivalents: C70600, CuNi10Fe1Mn, CW352H, 2.0872, 90/10 Cupro Nickel
  - Forms: seamless-pipes, welded-pipes, plates, sheets-coils, flanges, fittings, round-bars
  - Datasheet page: https://www.axicor.ae/materials/cupro-nickel/cuni-90-10
- **Cupro Nickel 70/30 Seamless Pipes** (UNS C71500, EN CW354H / CuNi30Mn1Fe, DIN 2.0882, Navy MIL-T-16420K): The higher-duty cupro nickel. Tripling the nickel to 30% raises strength, erosion-corrosion resistance and the allowable seawater velocity to around 4.5 m/s, and lifts the service temperature well above 90/10. It is the 
  - Equivalents: C71500, CuNi30Mn1Fe, CW354H, 2.0882, 70/30 Cupro Nickel
  - Forms: seamless-pipes, welded-pipes, plates, sheets-coils, flanges, fittings, round-bars
  - Datasheet page: https://www.axicor.ae/materials/cupro-nickel/cuni-70-30

## Key pages

- Materials index: https://www.axicor.ae/materials
- Grade finder: https://www.axicor.ae/grades
- Full product catalogue (PDF, all grades): https://www.axicor.ae/catalogue
- All product lines (steels + industrial products): https://www.axicor.ae/products
- Valves: https://www.axicor.ae/products/valves — Process and project valves supplied to specification
- Tungsten Carbide Studs: https://www.axicor.ae/products/tungsten-carbide-studs — HPGR and crusher wear protection
- Refractory Materials: https://www.axicor.ae/products/refractory-materials — Linings for kilns, furnaces and high-temperature plant
- Heat Exchanger Tubes: https://www.axicor.ae/products/heat-exchanger-tubes — Shell and tube bundles supplied to the TEMA sheet
- Boiler Tubes: https://www.axicor.ae/products/boiler-tubes — Water wall, superheater and reheater tubing
- Finned Tubes (Fintubes): https://www.axicor.ae/products/finned-tubes — Extended surface tubing for air-cooled and recovery duty
- BA Finish Tubes: https://www.axicor.ae/products/ba-finish-tubes — Bright annealed tubing for clean and instrument service
- Industries we supply (index): https://www.axicor.ae/industries
- Markets we supply (GCC and Africa): https://www.axicor.ae/markets
- End-use applications index: https://www.axicor.ae/applications
- Market — GCC: https://www.axicor.ae/markets/gcc
- Market — United Arab Emirates: https://www.axicor.ae/markets/uae (sectors: oilgas, petrochemical, desal, marine, cement, fabrication)
- Market — Africa: https://www.axicor.ae/markets/africa
- Market — Saudi Arabia: https://www.axicor.ae/markets/saudi-arabia (sectors: oilgas, petrochemical, cement, mining, desal)
- Market — Oman: https://www.axicor.ae/markets/oman (sectors: oilgas, petrochemical, mining, marine, desal)
- Market — Qatar: https://www.axicor.ae/markets/qatar (sectors: oilgas, petrochemical, desal, fabrication)
- Market — Kuwait: https://www.axicor.ae/markets/kuwait (sectors: oilgas, petrochemical, desal, fabrication)
- Market — Bahrain: https://www.axicor.ae/markets/bahrain (sectors: oilgas, petrochemical, marine, desal, fabrication)
- Market — Egypt: https://www.axicor.ae/markets/egypt (sectors: oilgas, petrochemical, cement, fabrication, desal)
- Market — Morocco: https://www.axicor.ae/markets/morocco (sectors: mining, cement, desal, petrochemical)
- Market — Algeria: https://www.axicor.ae/markets/algeria (sectors: oilgas, petrochemical, cement, desal)
- Market — Nigeria: https://www.axicor.ae/markets/nigeria (sectors: cement, oilgas, mining, marine)
- Market — Kenya: https://www.axicor.ae/markets/kenya (sectors: cement, mining, fabrication, pharma)
- Market — South Africa: https://www.axicor.ae/markets/south-africa (sectors: mining, petrochemical, cement, fabrication)
- Market — Tanzania: https://www.axicor.ae/markets/tanzania (sectors: mining, cement, fabrication)
- Market — Ghana: https://www.axicor.ae/markets/ghana (sectors: mining, cement, oilgas, marine)
- Application — Cement chute and silo liners: https://www.axicor.ae/applications/cement-chute-liners — Stopping wear and hang-up between the crusher and the kiln
- Application — HPGR roller re-studding: https://www.axicor.ae/applications/hpgr-re-studding — Carbide stud patterns matched to the ore, not the catalogue
- Application — Crusher and screen wear parts: https://www.axicor.ae/applications/crusher-wear-parts — Jaw, cone and screen protection that survives the feed
- Application — Mining haul bodies and buckets: https://www.axicor.ae/applications/mining-haul-bodies — Lighter bodies that carry more and last longer
- Application — Bulk handling chutes and silos: https://www.axicor.ae/applications/bulk-handling-chutes-and-silos — Flow problems solved with the right liner, not a bigger hammer
- Application — Seawater cooling and firewater lines: https://www.axicor.ae/applications/seawater-cooling-lines — Piping that resists seawater and refuses to foul
- Application — Desalination heat recovery tubing: https://www.axicor.ae/applications/desal-heat-recovery-tubes — Tube bundles for MSF, MED and SWRO plant
- Application — Pressure vessel shells and heads: https://www.axicor.ae/applications/pressure-vessel-shells — Plate for ASME Section VIII fabrication, including sour service
- Application — Refinery heater and furnace coils: https://www.axicor.ae/applications/refinery-heater-coils — Tubing for fired heaters, crackers and reformers
- Application — Sour service pipelines and spools: https://www.axicor.ae/applications/sour-service-pipelines — Line pipe, plate and CRA for wet H2S duty
- Application — Steam headers and main steam piping: https://www.axicor.ae/applications/steam-header-piping — Cr-Mo and Grade 91 piping for power and process steam
- Application — Hygienic and high purity process lines: https://www.axicor.ae/applications/hygienic-process-lines — BA finish tube and 316L for food, dairy and pharma
- Application — Offshore topside and subsea spools: https://www.axicor.ae/applications/offshore-topside-spools — Duplex and stainless spools for platform and splash zone duty
- Application — Armoured vehicle and cabin protection: https://www.axicor.ae/applications/armoured-vehicle-hulls — Protection plate cut to the ballistic specification
- Application — Urea and ammonia plant material: https://www.axicor.ae/applications/urea-and-ammonia-plant — CRA selection for fertiliser process conditions
- Industry page — oilgas: https://www.axicor.ae/industries/oilgas (sectors: Oil & Gas, Offshore, Refining, EPC Contractors)
- Industry page — petrochemical: https://www.axicor.ae/industries/petrochemical (sectors: Petrochemical, Chemical Processing, Fertiliser, Refining)
- Industry page — cement: https://www.axicor.ae/industries/cement (sectors: Cement, Bulk Handling, Aggregates, Glass & Lime)
- Industry page — mining: https://www.axicor.ae/industries/mining (sectors: Mining, Quarrying, Mineral Processing, Bulk Handling, Aggregates)
- Industry page — pharma: https://www.axicor.ae/industries/pharma (sectors: Pharmaceutical, Food & Beverage, Medical)
- Industry page — desal: https://www.axicor.ae/industries/desal (sectors: Desalination, Water & Desalination, Power Generation, Power, Nuclear)
- Industry page — marine: https://www.axicor.ae/industries/marine (sectors: Marine, Offshore, Shipbuilding)
- Industry page — defence: https://www.axicor.ae/industries/defence (sectors: Defence, Security, Government)
- Industry page — fabrication: https://www.axicor.ae/industries/fabrication (sectors: Construction, General Engineering, Lifting & Cranes, Transport, Recycling)
- Principal mills we buy from: https://www.axicor.ae/mills
- Answers to common buying and specification questions: https://www.axicor.ae/answers
- Glossary of steel and certification terms: https://www.axicor.ae/glossary
- Industry insights: https://www.axicor.ae/insights
- How this content is produced (editorial policy): https://www.axicor.ae/editorial-policy
- Projects delivered: https://www.axicor.ae/projects
- Certifications: https://www.axicor.ae/certifications
- Request a quote: https://www.axicor.ae/contact

Generated 2026-10-12.

## Answers to common specification and buying questions


## Glossary


## Grade specifications

### A335 P12 Seamless Pipe (alloy-steel)
Page: https://www.axicor.ae/materials/alloy-steel/a335-p12
Stock position: Mill indent | Lead time: 4 - 8 weeks mill indent
Chemical composition (%): C 0.05 0.17; Cr 0.80 1.15; Mo 0.45 0.60; Si 0.15 0.40; Mn 0.40 0.65
Mechanical properties: Yield Strength (0.2%) 220 min MPa; Tensile Strength 415 min MPa; Elongation 20 min (longitudinal) %; Condition Normalised and tempered, seamless
Physical properties: Density 7.85 g/cm3; Max Service Temperature 550 - 650 depending on grade C
Forms and sizes: seamless-pipes 1/2" - 24" NB, SCH 40 - SCH 160 / XXS; fittings 1/2" - 24" butt weld fittings, WP11 / WP22 / WP91; flanges 1/2" - 24", 150# - 2500#, F11 / F12 / F22 / F5 / F9 / F91
Equivalents: 13CrMo4-5, 1.7335, WP12, F12

### SA387 Grade 11 Class 2 (alloy-steel)
Page: https://www.axicor.ae/materials/alloy-steel/sa387-grade-11
Stock position: Mill indent | Lead time: 4 - 8 weeks mill indent
Chemical composition (%): C 0.05 0.17; Cr 1.00 1.50; Mo 0.45 0.65; Si 0.50 0.80; Mn 0.40 0.65
Mechanical properties: Yield Strength (0.2%) 310 min MPa; Tensile Strength 515 - 690 MPa; Elongation 18 min %; Condition Normalised and tempered
Physical properties: Density 7.85 g/cm3; Max Service Temperature 550 - 650 depending on grade C
Forms and sizes: plates 6 - 150 mm thk, up to 3000 mm wide, N or Q+T; flanges 1/2" - 24", 150# - 2500#, F11 / F12 / F22 / F5 / F9 / F91; fittings 1/2" - 24" butt weld fittings, WP11 / WP22 / WP91
Equivalents: 13CrMoSi5-5, 1.7336, A387 Gr 11 Cl 2

### SA387 Grade 12 Class 2 (alloy-steel)
Page: https://www.axicor.ae/materials/alloy-steel/sa387-grade-12
Stock position: Mill indent | Lead time: 4 - 8 weeks mill indent
Chemical composition (%): C 0.05 0.17; Cr 0.80 1.15; Mo 0.45 0.60; Si 0.15 0.40; Mn 0.40 0.65
Mechanical properties: Yield Strength (0.2%) 275 min MPa; Tensile Strength 450 - 585 MPa; Elongation 18 min %; Condition Normalised and tempered
Physical properties: Density 7.85 g/cm3; Max Service Temperature 550 - 650 depending on grade C
Forms and sizes: plates 6 - 150 mm thk, up to 3000 mm wide, N or Q+T; flanges 1/2" - 24", 150# - 2500#, F11 / F12 / F22 / F5 / F9 / F91; fittings 1/2" - 24" butt weld fittings, WP11 / WP22 / WP91
Equivalents: 13CrMo4-5, 1.7335, A387 Gr 12 Cl 2

### SA387 Grade 22 Class 2 (alloy-steel)
Page: https://www.axicor.ae/materials/alloy-steel/sa387-grade-22
Stock position: Mill indent | Lead time: 4 - 8 weeks mill indent
Chemical composition (%): C 0.05 0.15; Cr 2.00 2.50; Mo 0.90 1.10; Si - 0.50; Mn 0.30 0.60
Mechanical properties: Yield Strength (0.2%) 310 min MPa; Tensile Strength 515 - 690 MPa; Elongation 18 min %; Condition Normalised and tempered
Physical properties: Density 7.85 g/cm3; Max Service Temperature 550 - 650 depending on grade C
Forms and sizes: plates 6 - 150 mm thk, up to 3000 mm wide, N or Q+T; flanges 1/2" - 24", 150# - 2500#, F11 / F12 / F22 / F5 / F9 / F91; fittings 1/2" - 24" butt weld fittings, WP11 / WP22 / WP91
Equivalents: 10CrMo9-10, 1.7380, A387 Gr 22 Cl 2

### AISI 4340 / 34CrNiMo6 (alloy-steel)
Page: https://www.axicor.ae/materials/alloy-steel/aisi-4340
Stock position: Mill indent | Lead time: 4 - 8 weeks mill indent
Chemical composition (%): C 0.38 0.43; Ni 1.65 2.00; Cr 0.70 0.90; Mo 0.20 0.30
Mechanical properties: Yield Strength (Q+T) 860 min MPa; Tensile Strength (Q+T) 1000 - 1200 MPa; Elongation 10 min %
Physical properties: Density 7.85 g/cm3
Forms and sizes: round-bars 20 - 1000 mm dia, forged; blocks-profiles Forged blocks and discs
Equivalents: 1.6582, 34CrNiMo6, SNCM439, 817M40

### AISI 4140 / 42CrMo4 (alloy-steel)
Page: https://www.axicor.ae/materials/alloy-steel/aisi-4140
Stock position: Ex-stock Dubai | Lead time: 2 - 3 working days ex Dubai
Chemical composition (%): C 0.38 0.43; Cr 0.80 1.10; Mo 0.15 0.25; Mn 0.75 1.00
Mechanical properties: Yield Strength (Q+T) 650 - 900 MPa; Tensile Strength (Q+T) 900 - 1100 MPa; Elongation 12 min %; Hardness (Q+T) 280 - 320 HBW
Physical properties: Density 7.85 g/cm3
Forms and sizes: round-bars 16 - 800 mm dia, forged or peeled; plates 10 - 200 mm thk; blocks-profiles Cut blocks to size
Equivalents: 1.7225, 42CrMo4, SCM440, 709M40

### SA387 Grade 5 Class 2 (alloy-steel)
Page: https://www.axicor.ae/materials/alloy-steel/sa387-grade-5
Stock position: Mill indent | Lead time: 4 - 8 weeks mill indent
Chemical composition (%): C - 0.15; Cr 4.00 6.00; Mo 0.45 0.65; Si - 0.50; Mn 0.30 0.60
Mechanical properties: Yield Strength (0.2%) 310 min MPa; Tensile Strength 515 - 690 MPa; Elongation 18 min %; Condition Normalised and tempered
Physical properties: Density 7.85 g/cm3; Max Service Temperature 550 - 650 depending on grade C
Forms and sizes: plates 6 - 150 mm thk, up to 3000 mm wide, N or Q+T; flanges 1/2" - 24", 150# - 2500#, F11 / F12 / F22 / F5 / F9 / F91; fittings 1/2" - 24" butt weld fittings, WP11 / WP22 / WP91
Equivalents: X12CrMo5, 1.7362, A387 Gr 5 Cl 2

### SA387 Grade 9 Class 2 (alloy-steel)
Page: https://www.axicor.ae/materials/alloy-steel/sa387-grade-9
Stock position: Mill indent | Lead time: 4 - 8 weeks mill indent
Chemical composition (%): C - 0.15; Cr 8.00 10.00; Mo 0.90 1.10; Si 0.25 1.00; Mn 0.30 0.60
Mechanical properties: Yield Strength (0.2%) 380 min MPa; Tensile Strength 585 - 760 MPa; Elongation 18 min %; Condition Normalised and tempered
Physical properties: Density 7.85 g/cm3; Max Service Temperature 550 - 650 depending on grade C
Forms and sizes: plates 6 - 150 mm thk, up to 3000 mm wide, N or Q+T; flanges 1/2" - 24", 150# - 2500#, F11 / F12 / F22 / F5 / F9 / F91; fittings 1/2" - 24" butt weld fittings, WP11 / WP22 / WP91
Equivalents: X11CrMo9-1, 1.7386, A387 Gr 9 Cl 2

### SA387 Grade 91 Class 2 (alloy-steel)
Page: https://www.axicor.ae/materials/alloy-steel/sa387-grade-91
Stock position: Mill indent | Lead time: 4 - 8 weeks mill indent
Chemical composition (%): C 0.08 0.12; Cr 8.00 9.50; Mo 0.85 1.05; V 0.18 0.25; Nb 0.06 0.10; N 0.030 0.070
Mechanical properties: Yield Strength (0.2%) 415 min MPa; Tensile Strength 585 - 760 MPa; Elongation 18 min %; Condition Normalised and tempered
Physical properties: Density 7.85 g/cm3; Max Service Temperature 550 - 650 depending on grade C
Forms and sizes: plates 6 - 150 mm thk, up to 3000 mm wide, N or Q+T; flanges 1/2" - 24", 150# - 2500#, F11 / F12 / F22 / F5 / F9 / F91; fittings 1/2" - 24" butt weld fittings, WP11 / WP22 / WP91
Equivalents: X10CrMoVNb9-1, 1.4903, P91, A387 Gr 91

### A335 P11 Seamless Pipe (alloy-steel)
Page: https://www.axicor.ae/materials/alloy-steel/a335-p11
Stock position: Mill indent | Lead time: 4 - 8 weeks mill indent
Chemical composition (%): C 0.05 0.17; Cr 1.00 1.50; Mo 0.45 0.65; Si 0.50 0.80; Mn 0.40 0.65
Mechanical properties: Yield Strength (0.2%) 205 min MPa; Tensile Strength 415 min MPa; Elongation 20 min (longitudinal) %; Condition Normalised and tempered, seamless
Physical properties: Density 7.85 g/cm3; Max Service Temperature 550 - 650 depending on grade C
Forms and sizes: seamless-pipes 1/2" - 24" NB, SCH 40 - SCH 160 / XXS; fittings 1/2" - 24" butt weld fittings, WP11 / WP22 / WP91; flanges 1/2" - 24", 150# - 2500#, F11 / F12 / F22 / F5 / F9 / F91
Equivalents: 13CrMoSi5-5, 1.7336, WP11, F11

### A335 P22 Seamless Pipe (alloy-steel)
Page: https://www.axicor.ae/materials/alloy-steel/a335-p22
Stock position: Mill indent | Lead time: 4 - 8 weeks mill indent
Chemical composition (%): C 0.05 0.15; Cr 2.00 2.50; Mo 0.90 1.10; Si - 0.50; Mn 0.30 0.60
Mechanical properties: Yield Strength (0.2%) 205 min MPa; Tensile Strength 415 min MPa; Elongation 20 min (longitudinal) %; Condition Normalised and tempered, seamless
Physical properties: Density 7.85 g/cm3; Max Service Temperature 550 - 650 depending on grade C
Forms and sizes: seamless-pipes 1/2" - 24" NB, SCH 40 - SCH 160 / XXS; fittings 1/2" - 24" butt weld fittings, WP11 / WP22 / WP91; flanges 1/2" - 24", 150# - 2500#, F11 / F12 / F22 / F5 / F9 / F91
Equivalents: 10CrMo9-10, 1.7380, WP22, F22

### A335 P5 Seamless Pipe (alloy-steel)
Page: https://www.axicor.ae/materials/alloy-steel/a335-p5
Stock position: Mill indent | Lead time: 4 - 8 weeks mill indent
Chemical composition (%): C - 0.15; Cr 4.00 6.00; Mo 0.45 0.65; Si - 0.50; Mn 0.30 0.60
Mechanical properties: Yield Strength (0.2%) 205 min MPa; Tensile Strength 415 min MPa; Elongation 20 min (longitudinal) %; Condition Normalised and tempered, seamless
Physical properties: Density 7.85 g/cm3; Max Service Temperature 550 - 650 depending on grade C
Forms and sizes: seamless-pipes 1/2" - 24" NB, SCH 40 - SCH 160 / XXS; fittings 1/2" - 24" butt weld fittings, WP11 / WP22 / WP91; flanges 1/2" - 24", 150# - 2500#, F11 / F12 / F22 / F5 / F9 / F91
Equivalents: X12CrMo5, 1.7362, WP5, F5

### A335 P9 Seamless Pipe (alloy-steel)
Page: https://www.axicor.ae/materials/alloy-steel/a335-p9
Stock position: Mill indent | Lead time: 4 - 8 weeks mill indent
Chemical composition (%): C - 0.15; Cr 8.00 10.00; Mo 0.90 1.10; Si 0.25 1.00; Mn 0.30 0.60
Mechanical properties: Yield Strength (0.2%) 205 min MPa; Tensile Strength 415 min MPa; Elongation 20 min (longitudinal) %; Condition Normalised and tempered, seamless
Physical properties: Density 7.85 g/cm3; Max Service Temperature 550 - 650 depending on grade C
Forms and sizes: seamless-pipes 1/2" - 24" NB, SCH 40 - SCH 160 / XXS; fittings 1/2" - 24" butt weld fittings, WP11 / WP22 / WP91; flanges 1/2" - 24", 150# - 2500#, F11 / F12 / F22 / F5 / F9 / F91
Equivalents: X11CrMo9-1, 1.7386, WP9, F9

### A335 P91 Seamless Pipe (alloy-steel)
Page: https://www.axicor.ae/materials/alloy-steel/a335-p91
Stock position: Mill indent | Lead time: 4 - 8 weeks mill indent
Chemical composition (%): C 0.08 0.12; Cr 8.00 9.50; Mo 0.85 1.05; V 0.18 0.25; Nb 0.06 0.10; N 0.030 0.070
Mechanical properties: Yield Strength (0.2%) 415 min MPa; Tensile Strength 585 min MPa; Elongation 20 min (longitudinal) %; Condition Normalised and tempered, seamless
Physical properties: Density 7.85 g/cm3; Max Service Temperature 550 - 650 depending on grade C
Forms and sizes: seamless-pipes 1/2" - 24" NB, SCH 40 - SCH 160 / XXS; fittings 1/2" - 24" butt weld fittings, WP11 / WP22 / WP91; flanges 1/2" - 24", 150# - 2500#, F11 / F12 / F22 / F5 / F9 / F91
Equivalents: X10CrMoVNb9-1, 1.4903, WP91, F91

### Armox 500T (armor-ballistic-steel)
Page: https://www.axicor.ae/materials/armor-ballistic-steel/armox-500t
Stock position: Mill indent | Lead time: 4 - 8 weeks mill indent
Chemical composition (%): C - 0.32; Mn - 1.20; Cr - 1.50; Ni - 1.80
Mechanical properties: Hardness 480 - 540 HBW; Yield Strength (typical) 1250 MPa; Tensile Strength (typical) 1450 - 1750 MPa; Impact Energy at -40 C 32 J
Physical properties: Density 7.85 g/cm3
Forms and sizes: plates 3 - 80 mm thk; blocks-profiles Profile cut armour panels to drawing
Equivalents: Mars 240, Ramor 500, Protection 500

### Armox 600T (armor-ballistic-steel)
Page: https://www.axicor.ae/materials/armor-ballistic-steel/armox-600t
Stock position: Mill indent | Lead time: 4 - 8 weeks mill indent
Chemical composition (%): C - 0.47; Cr - 1.50; Ni - 3.00; Mo - 0.70
Mechanical properties: Hardness 570 - 640 HBW; Tensile Strength (typical) 2000 MPa; Impact Energy at -40 C 20 J
Physical properties: Density 7.85 g/cm3
Forms and sizes: plates 4 - 20 mm thk; blocks-profiles Profile cut armour panels
Equivalents: Mars 300, Ramor 550

### S355J2+N Steel Plates (carbon-steel-plates)
Page: https://www.axicor.ae/materials/carbon-steel-plates/s355j2n
Stock position: Ex-stock Dubai | Lead time: 2 - 3 working days ex Dubai
Chemical composition (%): C - 0.20; Mn - 1.60; Si - 0.55; P - 0.025; S - 0.025
Mechanical properties: Yield Strength 355 min (t <= 16 mm) MPa; Tensile Strength 470 - 630 MPa; Elongation 22 min %; Impact Energy 27 J min at -20 C J
Physical properties: Density 7.85 g/cm3; Modulus of Elasticity 210 GPa
Forms and sizes: plates 5 - 200 mm thk, up to 3000 mm wide, cut to size; sheets-coils 2 - 12 mm thk, 1250 / 1500 / 2000 mm wide
Equivalents: 1.0570, S355J2+N, A572 Gr 50, SM490YB

### S355J2W+N / Corten Steel Plates (carbon-steel-plates)
Page: https://www.axicor.ae/materials/carbon-steel-plates/s355j2w-corten
Stock position: Mill indent | Lead time: 4 - 8 weeks mill indent
Chemical composition (%): C - 0.16; Cu 0.25 0.55; Cr 0.40 0.80; Ni - 0.65; Mn 0.50 1.50
Mechanical properties: Yield Strength 355 min (t <= 16 mm) MPa; Tensile Strength 470 - 630 MPa; Elongation 20 min %; Impact Energy 27 J min at -20 C J
Physical properties: Density 7.85 g/cm3; Modulus of Elasticity 210 GPa
Forms and sizes: plates 5 - 200 mm thk, up to 3000 mm wide, cut to size; sheets-coils 2 - 12 mm thk, 1250 / 1500 / 2000 mm wide
Equivalents: 1.8965, Corten B, A588 Gr A, A709 Gr 50W

### SA516 Grade 60 Plates (carbon-steel-plates)
Page: https://www.axicor.ae/materials/carbon-steel-plates/sa516-grade-60
Stock position: Mill indent | Lead time: 4 - 8 weeks mill indent
Chemical composition (%): C - 0.23 (t <= 25 mm); Mn 0.60 1.20; Si 0.15 0.40; P - 0.025; S - 0.025
Mechanical properties: Yield Strength 220 min MPa; Tensile Strength 415 - 550 MPa; Elongation 21 min (200 mm gauge) %; Condition As rolled or normalised
Physical properties: Density 7.85 g/cm3; Max Service Temperature 425 C
Forms and sizes: plates 5 - 200 mm thk, up to 3000 mm wide, cut to size
Equivalents: SA516 Gr 60, P265GH, 1.0425, SA516M Gr 415

### SA516 Grade 70 Plates (carbon-steel-plates)
Page: https://www.axicor.ae/materials/carbon-steel-plates/sa516-grade-70
Stock position: Ex-stock Dubai | Lead time: 2 - 3 working days ex Dubai
Chemical composition (%): C - 0.27 (t <= 25 mm); Mn 0.85 1.20; Si 0.15 0.40; P - 0.025; S - 0.025 (0.002 max for HIC)
Mechanical properties: Yield Strength 260 min MPa; Tensile Strength 485 - 620 MPa; Elongation 21 min (200 mm gauge) %; Hardness 200 max HBW (NACE sour service) HBW
Physical properties: Density 7.85 g/cm3; Max Service Temperature 425 C
Forms and sizes: plates 5 - 200 mm thk, up to 3000 mm wide, cut to size
Equivalents: SA516 Gr 70, P355GH, 1.0473, SA516M Gr 485

### Cupro Nickel 66/30/2/2 (C71640) (cupro-nickel)
Page: https://www.axicor.ae/materials/cupro-nickel/cuni-66-30-2-2
Stock position: Project supply | Lead time: 6 - 10 weeks on enquiry
Chemical composition (%): Cu Remainder -; Ni 29.0 32.0; Fe 1.70 2.30; Mn 1.50 2.50; Pb - 0.02
Mechanical properties: Yield Strength (0.2%) 170 min (annealed) MPa; Tensile Strength 415 min (annealed) MPa; Elongation 28 min %; Hardness 90 - 120 HV
Physical properties: Density 8.90 g/cm3; Thermal Conductivity 27 W/m.K; Max Service Temperature 400 C; Max seawater velocity 5.0 m/s
Forms and sizes: seamless-pipes 1/8" - 12" NB seamless, 6 - 108 mm OD tube, 0.8 - 6 mm wall; plates 3 - 50 mm thk condenser plate and tube sheet (ASTM B171); fittings 1/2" - 24" butt weld elbows, tees, reducers and stub ends; flanges 1/2" - 24", 150# - 300#, slip-on and weld neck
Equivalents: C71640, CuNi30Fe2Mn2, 66/30/2/2

### Cupro Nickel 90/10 Seamless Pipes (cupro-nickel)
Page: https://www.axicor.ae/materials/cupro-nickel/cuni-90-10
Stock position: Mill indent | Lead time: 4 - 8 weeks mill indent
Chemical composition (%): Cu Remainder -; Ni 9.0 11.0; Fe 1.0 1.8; Mn 0.5 1.0; Pb - 0.02
Mechanical properties: Yield Strength (0.2%) 105 min (annealed) MPa; Tensile Strength 275 min (annealed) MPa; Elongation 30 min %; Hardness 60 - 90 HV
Physical properties: Density 8.94 g/cm3; Thermal Conductivity 40 - 50 W/m.K; Max Service Temperature 300 C; Max seawater velocity 3.0 - 3.5 m/s
Forms and sizes: seamless-pipes 1/8" - 12" NB seamless, 6 - 108 mm OD tube, 0.8 - 6 mm wall; welded-pipes 4" - 36" OD welded pipe to ASTM B467; plates 3 - 50 mm thk condenser plate and tube sheet (ASTM B171); sheets-coils 0.6 - 3 mm thk sheet and coil; flanges 1/2" - 24", 150# - 300#, slip-on and weld neck; fittings 1/2" - 24" butt weld elbows, tees, reducers and stub ends; round-bars 10 - 200 mm dia rod and bar
Equivalents: C70600, CuNi10Fe1Mn, CW352H, 2.0872, 90/10 Cupro Nickel

### Cupro Nickel 70/30 Seamless Pipes (cupro-nickel)
Page: https://www.axicor.ae/materials/cupro-nickel/cuni-70-30
Stock position: Mill indent | Lead time: 4 - 8 weeks mill indent
Chemical composition (%): Cu Remainder -; Ni 29.0 33.0; Fe 0.40 1.00; Mn 0.50 1.50; Pb - 0.02
Mechanical properties: Yield Strength (0.2%) 140 min (annealed) MPa; Tensile Strength 380 min (annealed) MPa; Elongation 30 min %; Hardness 80 - 110 HV
Physical properties: Density 8.94 g/cm3; Thermal Conductivity 29 W/m.K; Max Service Temperature 400 C; Max seawater velocity 4.0 - 4.5 m/s
Forms and sizes: seamless-pipes 1/8" - 12" NB seamless, 6 - 108 mm OD tube, 0.8 - 6 mm wall; welded-pipes 4" - 36" OD welded pipe to ASTM B467; plates 3 - 50 mm thk condenser plate and tube sheet (ASTM B171); sheets-coils 0.6 - 3 mm thk sheet and coil; flanges 1/2" - 24", 150# - 300#, slip-on and weld neck; fittings 1/2" - 24" butt weld elbows, tees, reducers and stub ends; round-bars 10 - 200 mm dia rod and bar
Equivalents: C71500, CuNi30Mn1Fe, CW354H, 2.0882, 70/30 Cupro Nickel

### Duplex 2205 (duplex-super-duplex)
Page: https://www.axicor.ae/materials/duplex-super-duplex/duplex-2205
Stock position: Ex-stock Dubai | Lead time: 2 - 3 working days ex Dubai
Chemical composition (%): C - 0.030; Cr 22.0 23.0; Ni 4.5 6.5; Mo 3.0 3.5; N 0.14 0.20
Mechanical properties: Yield Strength (0.2%) 450 min MPa; Tensile Strength 620 min MPa; Elongation 25 min %; Hardness 293 max HBW
Physical properties: Density 7.80 g/cm3; PREN 35; Max Service Temperature 300 C
Forms and sizes: plates 1.5 - 100 mm thk, up to 2500 mm wide; seamless-pipes 1/2" - 24" NB, SCH 5S - SCH 160; welded-pipes 6" - 48" OD; round-bars 6 - 500 mm dia; flanges 1/2" - 48", 150# - 2500#; fittings 1/2" - 48", SCH 10S - SCH 160
Equivalents: 1.4462, S32205, SAF 2205

### Super Duplex 2507 (duplex-super-duplex)
Page: https://www.axicor.ae/materials/duplex-super-duplex/super-duplex-2507
Stock position: Mill indent | Lead time: 4 - 8 weeks mill indent
Chemical composition (%): C - 0.030; Cr 24.0 26.0; Ni 6.0 8.0; Mo 3.0 5.0; N 0.24 0.32
Mechanical properties: Yield Strength (0.2%) 550 min MPa; Tensile Strength 750 min MPa; Elongation 25 min %; Hardness 310 max HBW
Physical properties: Density 7.80 g/cm3; PREN 41
Forms and sizes: plates 1.5 - 100 mm thk, up to 2500 mm wide; seamless-pipes 1/2" - 24" NB, SCH 5S - SCH 160; round-bars 6 - 500 mm dia; flanges 1/2" - 48", 150# - 2500#; fittings 1/2" - 48", SCH 10S - SCH 160
Equivalents: 1.4410, 1.4501, SAF 2507, Zeron 100

### S1100QL (high-strength-steel)
Page: https://www.axicor.ae/materials/high-strength-steel/s1100ql
Stock position: Mill indent | Lead time: 4 - 8 weeks mill indent
Chemical composition (%): C - 0.21; Mn - 1.70; Ni - 2.50
Mechanical properties: Yield Strength 1100 min MPa; Tensile Strength 1200 - 1500 MPa; Elongation 8 min %
Physical properties: Density 7.85 g/cm3
Forms and sizes: plates 5 - 40 mm thk
Equivalents: Strenx 1100, Weldox 1100

### S960QL (high-strength-steel)
Page: https://www.axicor.ae/materials/high-strength-steel/s960ql
Stock position: Mill indent | Lead time: 4 - 8 weeks mill indent
Chemical composition (%): C - 0.20; Mn - 1.70; Cr - 1.50; Mo - 0.70
Mechanical properties: Yield Strength 960 min MPa; Tensile Strength 980 - 1150 MPa; Elongation 10 min %; Impact Energy at -40 C 30 J
Physical properties: Density 7.85 g/cm3
Forms and sizes: plates 4 - 100 mm thk
Equivalents: 1.8933, Strenx 960, Weldox 960

### S690QL (high-strength-steel)
Page: https://www.axicor.ae/materials/high-strength-steel/s690ql
Stock position: Ex-stock Dubai | Lead time: 2 - 3 working days ex Dubai
Chemical composition (%): C - 0.20; Mn - 1.70; Cr - 1.50; Ni - 2.00
Mechanical properties: Yield Strength 690 min MPa; Tensile Strength 770 - 940 MPa; Elongation 14 min %; Impact Energy at -40 C 30 J
Physical properties: Density 7.85 g/cm3
Forms and sizes: plates 4 - 150 mm thk, up to 3500 mm wide
Equivalents: 1.8928, Weldox 700, Strenx 700, A514

### Alloy 800 (Incoloy 800) (nickel-alloys)
Page: https://www.axicor.ae/materials/nickel-alloys/alloy-800
Stock position: Mill indent | Lead time: 4 - 8 weeks mill indent
Chemical composition (%): Ni 30.0 35.0; Cr 19.0 23.0; Fe 39.5 -; C - 0.10; Al + Ti 0.15 0.60
Mechanical properties: Yield Strength (0.2%) 170 min MPa; Tensile Strength 450 min MPa; Elongation 30 min %; Condition Solution annealed
Physical properties: Density 7.94 g/cm3; Max Service Temperature 815 (Alloy 800) C
Forms and sizes: seamless-pipes 1/2" - 16" NB, SCH 10S - SCH 160, seamless; seamless-pipes 6 - 88.9 mm OD tube, BA / bright annealed finish; plates 3 - 50 mm thk, hot rolled and solution annealed; round-bars 10 - 300 mm dia; fittings 1/2" - 24" butt weld fittings and flanges
Equivalents: N08800, 1.4876, Incoloy 800, Alloy 800

### Alloy 800HT (Incoloy 800HT) (nickel-alloys)
Page: https://www.axicor.ae/materials/nickel-alloys/alloy-800ht
Stock position: Mill indent | Lead time: 4 - 8 weeks mill indent
Chemical composition (%): Ni 30.0 35.0; Cr 19.0 23.0; Fe 39.5 -; C 0.06 0.10; Al + Ti 0.85 1.20
Mechanical properties: Yield Strength (0.2%) 170 min MPa; Tensile Strength 450 min MPa; Elongation 30 min %; Condition Solution annealed, grain size controlled
Physical properties: Density 7.94 g/cm3; Max Service Temperature 1100 (short term) C
Forms and sizes: seamless-pipes 1/2" - 16" NB, SCH 10S - SCH 160, seamless; seamless-pipes 6 - 88.9 mm OD tube, BA / bright annealed finish; plates 3 - 50 mm thk, hot rolled and solution annealed; round-bars 10 - 300 mm dia; fittings 1/2" - 24" butt weld fittings and flanges
Equivalents: N08811, 1.4959, Incoloy 800HT, Alloy 800H / 800HT

### Alloy 825 (Incoloy 825) (nickel-alloys)
Page: https://www.axicor.ae/materials/nickel-alloys/alloy-825
Stock position: Mill indent | Lead time: 4 - 8 weeks mill indent
Chemical composition (%): Ni 38.0 46.0; Cr 19.5 23.5; Mo 2.50 3.50; Cu 1.50 3.00; Ti 0.60 1.20
Mechanical properties: Yield Strength (0.2%) 241 min MPa; Tensile Strength 586 min MPa; Elongation 30 min %; Hardness Reported for NACE sour service HRC
Physical properties: Density 8.14 g/cm3; Max Service Temperature 540 C
Forms and sizes: seamless-pipes 1/2" - 16" NB, SCH 10S - SCH 160, seamless; seamless-pipes 6 - 88.9 mm OD tube, BA / bright annealed finish; plates 3 - 50 mm thk, hot rolled and solution annealed; round-bars 10 - 300 mm dia; fittings 1/2" - 24" butt weld fittings and flanges
Equivalents: N08825, 2.4858, Incoloy 825, NiCr21Mo

### Alloy 740H (nickel-alloys)
Page: https://www.axicor.ae/materials/nickel-alloys/alloy-740
Stock position: Project supply | Lead time: 10 - 16 weeks on enquiry
Chemical composition (%): Ni Balance -; Cr 23.5 25.5; Co 15.0 22.0; Nb 0.50 2.50; Ti + Al 1.80 3.00
Mechanical properties: Yield Strength (0.2%) 620 min (aged) MPa; Tensile Strength 1000 min (aged) MPa; Elongation 20 min %; Condition Solution treated and aged
Physical properties: Density 8.05 g/cm3; Max Service Temperature 800 C
Forms and sizes: seamless-pipes 1/2" - 16" NB, SCH 10S - SCH 160, seamless; seamless-pipes 6 - 88.9 mm OD tube, BA / bright annealed finish; plates 3 - 50 mm thk, hot rolled and solution annealed; round-bars 10 - 300 mm dia
Equivalents: N07740, Inconel 740H, Alloy 740H

### Hastelloy C276 (nickel-alloys)
Page: https://www.axicor.ae/materials/nickel-alloys/hastelloy-c276
Stock position: Mill indent | Lead time: 4 - 8 weeks mill indent
Chemical composition (%): Ni - Balance; Mo 15.0 17.0; Cr 14.5 16.5; W 3.0 4.5; Fe 4.0 7.0
Mechanical properties: Yield Strength (0.2%) 283 min MPa; Tensile Strength 690 min MPa; Elongation 40 min %
Physical properties: Density 8.89 g/cm3; PREN 68
Forms and sizes: plates 1.5 - 100 mm thk, up to 2500 mm wide; seamless-pipes 1/2" - 24" NB, SCH 5S - SCH 160; round-bars 6 - 500 mm dia; flanges 1/2" - 48", 150# - 2500#; fittings 1/2" - 48", SCH 10S - SCH 160
Equivalents: 2.4819, N10276, Alloy C276

### Monel 400 (nickel-alloys)
Page: https://www.axicor.ae/materials/nickel-alloys/monel-400
Stock position: Mill indent | Lead time: 4 - 8 weeks mill indent
Chemical composition (%): Ni 63.0 -; Cu 28.0 34.0; Fe - 2.5; Mn - 2.0
Mechanical properties: Yield Strength (0.2%) 170 min MPa; Tensile Strength 480 min MPa; Elongation 35 min %
Physical properties: Density 8.80 g/cm3; Max Service Temperature 540 C
Forms and sizes: plates 1.5 - 100 mm thk, up to 2500 mm wide; seamless-pipes 1/2" - 24" NB, SCH 5S - SCH 160; round-bars 6 - 500 mm dia; flanges 1/2" - 48", 150# - 2500#; fittings 1/2" - 48", SCH 10S - SCH 160
Equivalents: 2.4360, N04400, Alloy 400, NiCu30Fe

### Inconel 600 (nickel-alloys)
Page: https://www.axicor.ae/materials/nickel-alloys/inconel-600
Stock position: Mill indent | Lead time: 4 - 8 weeks mill indent
Chemical composition (%): Ni 72.0 -; Cr 14.0 17.0; Fe 6.0 10.0; C - 0.15
Mechanical properties: Yield Strength (0.2%) 240 min MPa; Tensile Strength 550 min MPa; Elongation 30 min %
Physical properties: Density 8.47 g/cm3; Max Service Temperature 1090 C
Forms and sizes: plates 1.5 - 100 mm thk, up to 2500 mm wide; seamless-pipes 1/2" - 24" NB, SCH 5S - SCH 160; round-bars 6 - 500 mm dia; flanges 1/2" - 48", 150# - 2500#; fittings 1/2" - 48", SCH 10S - SCH 160
Equivalents: 2.4816, N06600, Alloy 600, NiCr15Fe

### Inconel 625 (nickel-alloys)
Page: https://www.axicor.ae/materials/nickel-alloys/inconel-625
Stock position: Mill indent | Lead time: 4 - 8 weeks mill indent
Chemical composition (%): Ni 58.0 -; Cr 20.0 23.0; Mo 8.0 10.0; Nb+Ta 3.15 4.15; Fe - 5.0
Mechanical properties: Yield Strength (0.2%) 414 min MPa; Tensile Strength 827 min MPa; Elongation 30 min %
Physical properties: Density 8.44 g/cm3; Max Service Temperature 980 C
Forms and sizes: plates 1.5 - 100 mm thk, up to 2500 mm wide; seamless-pipes 1/2" - 24" NB, SCH 5S - SCH 160; round-bars 6 - 500 mm dia; flanges 1/2" - 48", 150# - 2500#; fittings 1/2" - 48", SCH 10S - SCH 160
Equivalents: 2.4856, N06625, Alloy 625, NiCr22Mo9Nb

### Alloy 617 (nickel-alloys)
Page: https://www.axicor.ae/materials/nickel-alloys/alloy-617
Stock position: Mill indent | Lead time: 6 - 10 weeks mill indent
Chemical composition (%): Ni 44.5 -; Cr 20.0 24.0; Co 10.0 15.0; Mo 8.0 10.0; Al 0.80 1.50
Mechanical properties: Yield Strength (0.2%) 240 min MPa; Tensile Strength 655 min MPa; Elongation 35 min %; Condition Solution annealed
Physical properties: Density 8.36 g/cm3; Max Service Temperature 1100 C
Forms and sizes: seamless-pipes 1/2" - 16" NB, SCH 10S - SCH 160, seamless; seamless-pipes 6 - 88.9 mm OD tube, BA / bright annealed finish; plates 3 - 50 mm thk, hot rolled and solution annealed; round-bars 10 - 300 mm dia; fittings 1/2" - 24" butt weld fittings and flanges
Equivalents: N06617, 2.4663, Inconel 617, NiCr23Co12Mo

### API 5L X52 / L360 (octg-line-pipe)
Page: https://www.axicor.ae/materials/octg-line-pipe/api-5l-x52
Stock position: Mill indent | Lead time: 4 - 8 weeks mill indent
Chemical composition (%): C - 0.24 (PSL2 seamless); Mn - 1.40 - 1.65; P - 0.025; S - 0.015; CEpcm - 0.25 (sour service)
Mechanical properties: Yield Strength (0.5% EUL) 360 - 530 MPa; Tensile Strength 460 - 760 MPa; Yield / Tensile ratio 0.93 max (PSL2); Charpy V-notch 27 J min at 0 C (average of 3) J
Physical properties: Density 7.85 g/cm3; Modulus of Elasticity 210 GPa
Forms and sizes: seamless-pipes 1/2" - 24" NB, SCH 20 - SCH 160 / XXS; welded-pipes 6" - 56" OD, ERW, EFW and LSAW, 4 - 25 mm wall; flanges 1/2" - 48", 150# - 2500#, WN / SO / blind; fittings 1/2" - 48" butt weld elbows, tees, reducers and caps
Equivalents: L360, L360, ASTM A106 Gr B (lower grade substitute)

### API 5L X70 / L485 (octg-line-pipe)
Page: https://www.axicor.ae/materials/octg-line-pipe/api-5l-x70
Stock position: Mill indent | Lead time: 4 - 8 weeks mill indent
Chemical composition (%): C - 0.24 (PSL2 seamless); Mn - 1.40 - 1.65; P - 0.025; S - 0.015; CEpcm - 0.25 (sour service)
Mechanical properties: Yield Strength (0.5% EUL) 485 - 635 MPa; Tensile Strength 570 - 760 MPa; Yield / Tensile ratio 0.93 max (PSL2); Charpy V-notch 27 J min at 0 C (average of 3) J
Physical properties: Density 7.85 g/cm3; Modulus of Elasticity 210 GPa
Forms and sizes: seamless-pipes 1/2" - 24" NB, SCH 20 - SCH 160 / XXS; welded-pipes 6" - 56" OD, ERW, EFW and LSAW, 4 - 25 mm wall; flanges 1/2" - 48", 150# - 2500#, WN / SO / blind; fittings 1/2" - 48" butt weld elbows, tees, reducers and caps
Equivalents: L485, L485, ASTM A106 Gr B (lower grade substitute)

### API 5L X65 / L450 (octg-line-pipe)
Page: https://www.axicor.ae/materials/octg-line-pipe/api-5l-x65
Stock position: Mill indent | Lead time: 4 - 8 weeks mill indent
Chemical composition (%): C - 0.24 (PSL2 seamless); Mn - 1.40 - 1.65; P - 0.025; S - 0.015; CEpcm - 0.25 (sour service)
Mechanical properties: Yield Strength (0.5% EUL) 450 - 600 MPa; Tensile Strength 535 - 760 MPa; Yield / Tensile ratio 0.93 max (PSL2); Charpy V-notch 27 J min at 0 C (average of 3) J
Physical properties: Density 7.85 g/cm3; Modulus of Elasticity 210 GPa
Forms and sizes: seamless-pipes 1/2" - 24" NB, SCH 20 - SCH 160 / XXS; welded-pipes 6" - 56" OD, ERW, EFW and LSAW, 4 - 25 mm wall; flanges 1/2" - 48", 150# - 2500#, WN / SO / blind; fittings 1/2" - 48" butt weld elbows, tees, reducers and caps
Equivalents: L450, L450, ASTM A106 Gr B (lower grade substitute)

### 321 / 347 (stainless-steel)
Page: https://www.axicor.ae/materials/stainless-steel/ss-321-347
Stock position: Ex-stock Dubai | Lead time: 2 - 3 working days ex Dubai
Chemical composition (%): C - 0.08; Cr 17.0 19.0; Ni 9.0 12.0; Ti / Nb 5xC -
Mechanical properties: Yield Strength (0.2%) 205 min MPa; Tensile Strength 515 min MPa; Elongation 40 min %
Physical properties: Density 7.92 g/cm3; Max Service Temperature 900 C
Forms and sizes: plates 1.5 - 100 mm thk, up to 2500 mm wide; seamless-pipes 1/2" - 24" NB, SCH 5S - SCH 160; round-bars 6 - 500 mm dia; flanges 1/2" - 48", 150# - 2500#; fittings 1/2" - 48", SCH 10S - SCH 160
Equivalents: 1.4541, 1.4550, SUS321, SUS347

### 316 / 316L (stainless-steel)
Page: https://www.axicor.ae/materials/stainless-steel/ss-316-316l
Stock position: Ex-stock Dubai | Lead time: 2 - 3 working days ex Dubai
Chemical composition (%): C - 0.08 / 0.030; Cr 16.0 18.0; Ni 10.0 14.0; Mo 2.00 3.00; Mn - 2.00
Mechanical properties: Yield Strength (0.2%) 205 min MPa; Tensile Strength 515 min MPa; Elongation 40 min %; Hardness 217 max HBW
Physical properties: Density 7.98 g/cm3; Max Service Temperature 870 C; PREN 25
Forms and sizes: plates 1.5 - 100 mm thk, up to 2500 mm wide; sheets-coils 0.4 - 6 mm thk, 1000 / 1219 / 1500 mm wide; seamless-pipes 1/2" - 24" NB, SCH 5S - SCH 160; round-bars 6 - 500 mm dia; flanges 1/2" - 48", 150# - 2500#; fittings 1/2" - 48", SCH 10S - SCH 160
Equivalents: 1.4401, 1.4404, SUS316L, X2CrNiMo17-12-2

### 304 / 304L (stainless-steel)
Page: https://www.axicor.ae/materials/stainless-steel/ss-304-304l
Stock position: Ex-stock Dubai | Lead time: 2 - 3 working days ex Dubai
Chemical composition (%): C - 0.08 / 0.030; Cr 18.0 20.0; Ni 8.0 10.5; Mn - 2.00; Si - 0.75
Mechanical properties: Yield Strength (0.2%) 205 min MPa; Tensile Strength 515 min MPa; Elongation 40 min %; Hardness 201 max HBW
Physical properties: Density 7.93 g/cm3; Max Service Temperature 870 C; PREN 19
Forms and sizes: plates 1.5 - 100 mm thk, up to 2500 mm wide; sheets-coils 0.4 - 6 mm thk, 1000 / 1219 / 1500 mm wide; seamless-pipes 1/2" - 24" NB, SCH 5S - SCH 160; round-bars 6 - 500 mm dia; flanges 1/2" - 48", 150# - 2500#; fittings 1/2" - 48", SCH 10S - SCH 160
Equivalents: 1.4301, 1.4307, SUS304L, X2CrNi18-9

### 316Ti Stainless Steel (stainless-steel)
Page: https://www.axicor.ae/materials/stainless-steel/ss-316ti
Stock position: Mill indent | Lead time: 4 - 8 weeks mill indent
Chemical composition (%): C - 0.08; Cr 16.0 18.0; Ni 10.0 14.0; Mo 2.00 3.00; Ti 5xC 0.70
Mechanical properties: Yield Strength (0.2%) 205 min MPa; Tensile Strength 515 min MPa; Elongation 40 min %; Hardness 217 max HBW
Physical properties: Density 8.00 g/cm3; Max Service Temperature 900 C; PREN 25
Forms and sizes: plates 1.5 - 60 mm thk, up to 2500 mm wide; seamless-pipes 1/2" - 24" NB, SCH 5S - SCH 160; seamless-pipes 6 - 114 mm OD heat exchanger, boiler and finned tube; round-bars 6 - 400 mm dia; flanges 1/2" - 48", 150# - 2500#; fittings 1/2" - 48", SCH 10S - SCH 160
Equivalents: 1.4571, X6CrNiMoTi17-12-2, SUS316Ti, 316Ti

### 317L Stainless Steel (stainless-steel)
Page: https://www.axicor.ae/materials/stainless-steel/ss-317l
Stock position: Mill indent | Lead time: 4 - 8 weeks mill indent
Chemical composition (%): C - 0.030; Cr 18.0 20.0; Ni 11.0 15.0; Mo 3.00 4.00; Mn - 2.00
Mechanical properties: Yield Strength (0.2%) 205 min MPa; Tensile Strength 515 min MPa; Elongation 40 min %; Hardness 217 max HBW
Physical properties: Density 8.00 g/cm3; Max Service Temperature 870 C; PREN 30
Forms and sizes: plates 1.5 - 60 mm thk, up to 2500 mm wide; seamless-pipes 1/2" - 24" NB, SCH 5S - SCH 160; seamless-pipes 6 - 114 mm OD heat exchanger, boiler and finned tube; round-bars 6 - 400 mm dia; flanges 1/2" - 48", 150# - 2500#; fittings 1/2" - 48", SCH 10S - SCH 160
Equivalents: 1.4438, X2CrNiMo18-15-4, SUS317L, 317L

### 310S Stainless Steel (stainless-steel)
Page: https://www.axicor.ae/materials/stainless-steel/ss-310s
Stock position: Mill indent | Lead time: 4 - 8 weeks mill indent
Chemical composition (%): C - 0.08; Cr 24.0 26.0; Ni 19.0 22.0; Mn - 2.00; Si - 1.50
Mechanical properties: Yield Strength (0.2%) 205 min MPa; Tensile Strength 515 min MPa; Elongation 40 min %; Hardness 217 max HBW
Physical properties: Density 7.98 g/cm3; Max Service Temperature 1035 (continuous) C
Forms and sizes: plates 1.5 - 60 mm thk, up to 2500 mm wide; seamless-pipes 1/2" - 24" NB, SCH 5S - SCH 160; seamless-pipes 6 - 114 mm OD heat exchanger, boiler and finned tube; round-bars 6 - 400 mm dia; flanges 1/2" - 48", 150# - 2500#; fittings 1/2" - 48", SCH 10S - SCH 160
Equivalents: 1.4845, X8CrNi25-21, SUS310S, 310S

### 904L (stainless-steel)
Page: https://www.axicor.ae/materials/stainless-steel/ss-904l
Stock position: Mill indent | Lead time: 4 - 8 weeks mill indent
Chemical composition (%): C - 0.020; Cr 19.0 23.0; Ni 23.0 28.0; Mo 4.0 5.0; Cu 1.0 2.0
Mechanical properties: Yield Strength (0.2%) 220 min MPa; Tensile Strength 490 min MPa; Elongation 35 min %
Physical properties: Density 8.0 g/cm3; PREN 36
Forms and sizes: plates 1.5 - 100 mm thk, up to 2500 mm wide; seamless-pipes 1/2" - 24" NB, SCH 5S - SCH 160; round-bars 6 - 500 mm dia; flanges 1/2" - 48", 150# - 2500#; fittings 1/2" - 48", SCH 10S - SCH 160
Equivalents: 1.4539, N08904, Uranus B6

### Titanium Grade 2 (titanium)
Page: https://www.axicor.ae/materials/titanium/titanium-grade-2
Stock position: Mill indent | Lead time: 4 - 8 weeks mill indent
Chemical composition (%): Ti - Balance; Fe - 0.30; O - 0.25; N - 0.03
Mechanical properties: Yield Strength (0.2%) 275 min MPa; Tensile Strength 345 min MPa; Elongation 20 min %
Physical properties: Density 4.51 g/cm3; Max Service Temperature 425 C
Forms and sizes: plates 1.5 - 100 mm thk, up to 2500 mm wide; seamless-pipes 1/2" - 24" NB, SCH 5S - SCH 160; round-bars 6 - 500 mm dia; flanges 1/2" - 48", 150# - 2500#; fittings 1/2" - 48", SCH 10S - SCH 160; sheets-coils 0.4 - 6 mm thk, 1000 / 1219 / 1500 mm wide
Equivalents: 3.7035, R50400, Ti Gr2

### Titanium Grade 5 (Ti-6Al-4V) (titanium)
Page: https://www.axicor.ae/materials/titanium/titanium-grade-5
Stock position: Mill indent | Lead time: 4 - 8 weeks mill indent
Chemical composition (%): Ti - Balance; Al 5.5 6.75; V 3.5 4.5; Fe - 0.40
Mechanical properties: Yield Strength (0.2%) 828 min MPa; Tensile Strength 895 min MPa; Elongation 10 min %
Physical properties: Density 4.43 g/cm3; Max Service Temperature 400 C
Forms and sizes: plates 1.5 - 100 mm thk, up to 2500 mm wide; round-bars 6 - 500 mm dia; blocks-profiles Forged blocks and discs
Equivalents: 3.7165, R56400, Ti-6Al-4V, TA6V

### UHMW PE1000 (uhmw-pe)
Page: https://www.axicor.ae/materials/uhmw-pe/uhmw-pe1000
Stock position: Ex-stock Dubai | Lead time: 2 - 3 working days ex Dubai
Chemical composition (%): Polymer - PE-UHMW
Mechanical properties: Tensile Strength at Yield 17 - 21 MPa; Elongation at Break > 300 %; Notched Impact Strength No break; Shore D Hardness 62 - 66
Physical properties: Density 0.93 - 0.94 g/cm3; Max Service Temperature 80 C
Forms and sizes: plates 2 - 100 mm thk, 1000 x 2000 / 1250 x 3000 mm; blocks-profiles Machined liners, strips, rods and wear parts
Equivalents: PE-UHMW, TIVAR 1000, Polystone M

### UHMW PE8000 (uhmw-pe)
Page: https://www.axicor.ae/materials/uhmw-pe/uhmw-pe8000
Stock position: Mill indent | Lead time: 4 - 8 weeks mill indent
Chemical composition (%): Polymer - PE-UHMW enhanced
Mechanical properties: Tensile Strength at Yield 19 - 23 MPa; Elongation at Break > 300 %; Abrasion (sand slurry, PE1000 = 100) 70
Physical properties: Density 0.94 g/cm3; Max Service Temperature 80 C
Forms and sizes: plates 6 - 100 mm thk; blocks-profiles Heavy duty liners and wear plates
Equivalents: PE-UHMW enhanced, TIVAR HPV

### Hardox 450 (wear-resistant-steel)
Page: https://www.axicor.ae/materials/wear-resistant-steel/hardox-450
Stock position: Ex-stock Dubai | Lead time: 2 - 3 working days ex Dubai
Chemical composition (%): C - 0.19; Si - 0.70; Mn - 1.60; Cr - 0.50; B - 0.005
Mechanical properties: Hardness 425 - 475 HBW; Yield Strength (typical) 1200 MPa; Tensile Strength (typical) 1400 MPa; Impact Energy at -40 C 30 J
Physical properties: Density 7.85 g/cm3
Forms and sizes: plates 3 - 130 mm thk, up to 3350 mm wide; blocks-profiles Profile cut parts and liners to drawing
Equivalents: Dillidur 400V, Quard 450, XAR 450, Abrex 450

### Hardox 500 (wear-resistant-steel)
Page: https://www.axicor.ae/materials/wear-resistant-steel/hardox-500
Stock position: Ex-stock Dubai | Lead time: 2 - 3 working days ex Dubai
Chemical composition (%): C - 0.30; Mn - 1.60; Cr - 1.50; Ni - 1.50
Mechanical properties: Hardness 470 - 530 HBW; Yield Strength (typical) 1400 MPa; Tensile Strength (typical) 1550 MPa
Physical properties: Density 7.85 g/cm3
Forms and sizes: plates 4 - 103 mm thk, up to 3350 mm wide; blocks-profiles Profile cut wear parts
Equivalents: Dillidur 500V, Quard 500, XAR 500

### Hardox 600 (wear-resistant-steel)
Page: https://www.axicor.ae/materials/wear-resistant-steel/hardox-600
Stock position: Ex-stock Dubai | Lead time: 2 - 3 working days ex Dubai
Chemical composition (%): C - 0.47; Cr - 1.20; Ni - 2.50; Mo - 0.70
Mechanical properties: Hardness 570 - 640 HBW; Tensile Strength (typical) 2000 MPa
Physical properties: Density 7.85 g/cm3
Forms and sizes: plates 6 - 65 mm thk; blocks-profiles Profile cut wear parts
Equivalents: XAR 600, Abrex 600

Generated 2026-10-12.